Advertisement
15-38
SEATS
4. Remove seat back assembly from body.
5. To install, reverse removal procedure, making
certain that all attaching body tabs and hangers
have industrial body tape applied to them to act
as an anti-squeak.
FOLDING REAR SEAT B A C K -
"F" Body Styles
Removal and Installation
1. Remove rear seat cushion and lower folding
rear seat back.
2. At both right and left seat back link remove
stud nut securing seat back link to anchor
plate on floor pan (Fig. 15-44).
3. Lift seat back assembly upward to disengage
tab of link from slot in anchor plate (Fig.
15-44), and remove seat back assembly from
body.
4. To install folding seat back assembly, reverse
removal procedure.
FOLDING REAR SEAT BACK AND
FILLER PANEL-Corvair
FOLDING REAR SEAT BACK ASSEMBLY
Removal and Installation
1. Remove rear seat back cushion, as previously
described.
2. Lower folding seat back; then, remove three
screws from both sides of seat back securing
seat back to folding linkage.
3. Carefully disengage seat back from linkage
and remove folding seat back from body.
4.
To install, reverse removal procedure.
FOLDING REAR SEAT BACK LINKAGE
Removal and Installation
1. Remove rear seat cushion and folding seat
back, as previously described.
2. Mark position of linkage on floor pan. Remove
bolts securing folding seat back linkage to floor
pan and remove linkage.
3. To install, reverse removal procedure. Align
linkage on floor pan with previously made
alignment marks.
REAR FOLDING SEAT BACK FILLER PANEL-
10039 Style
Removal and Installation
1. Remove rear seat cushion, as previously de-
scribed; then lower folding seat back.
2. Lift up seat back filler panel sufficiently to
gain access to attaching screws and prop panel
in this position.
NOTE:
Prop should be wide enough to bear
against hinge and hold hinge in position during
removal of hinge attaching screws.
3. Remove filler panel hinge attaching screws;
then remove prop and remove filler panel.
4. To install, reverse removal procedure.
Fig. 15-44—Folding Rear Seat Back Assembly -
" F " Body Styles
1. Link-to-Anchor Plate
Stud Nut
2. Folding Seat Back Link
3. Link Tab
4 . Anchor Plate Slot
5. Folding Seat Back
Link Anchor Plate
(on floor pan)
Advertisement
