Advertisement
FRONT END
5-7
3. To move door right or left, loosen hinge-to
instrument panel screws and position door as
desired.
4. Striker plates are adjustable on the instrument
panel by loosening the attaching screws and
positioning the striker plate as desired (Figs.
5-9, 5-10, 5-11 and 5-12).
INSTRUMENT PANEL C O V E R -
All Chevrolet Styles
The instrument panel cover is secured to the in-
strument panel by studs and nuts. In addition, the
"A"
body cover is secured by clips and screws.
Figures 5-13, 5-14, 5-15 and 5-16 illustrate the
cover attachments for each of the Chevrolet bodies.
INSTRUMENT PANEL DOOR LOCKS
All Except " E " Bodies and " C "
Cadillac Bodies
Removal and Installation
1. Open compartment door, remove screw at-
taching lock to door inner panel and remove
lock assembly (Figs. 5-9, 5-10, 5-11 and 5-12).
Removal and Installation
1. Remove windshield side garnish moldings
where necessary.
2. On "A" bodies, remove exposed screws on
outboard ends of cover (Fig. 5-16).
3. Remove instrument panel cluster and glove
box.
4. Working through cluster and glove box opening,
remove attaching nuts and carefully remove
cover assembly.
5. To install, reverse removal procedure.
SECTION A-A
SCREW
SECTION C-C
2367
Fig. 5-15—Instrument Panel Cover - " B " Body
Fig. 5-16—Instrument Panel Cover - " A " Body
Advertisement
