Advertisement
15-52
SEATS
FOLDING SECOND SEAT SIDE OUTER
LINKAGE—Right or Left Seat—"65" Styles
Removal and Installation
1. Remove folding second seat assembly from car
as previously described and place on a clean
surface.
2. Remove outer linkage cover. Remove screw
securing seat rear floor pan linkage to seat
outer attaching screw (Fig. 15-73).
3. Remove hog rings and detach rear portion of
trim sufficiently to remove three screws s e -
curing outer linkage to seat cushion frame.
(See Fig. 15-71).
4. Remove outer linkage-to-seat back panel at-
taching screws (see Fig. 15-71); then, remove
linkage and seat back catch from seat.
5. To install, reverse removal procedure. Install
seat back lock and spring as described under
"Folding Second Seat Back Lock - Removal
and Installation' \
FOLDING SECOND SEAT BACK LOCK-
Right or Left S e a t - " 6 5 " Styles
Removal
1. Remove seat back trim assembly, as pre-
viously described. Remove outer linkage cover.
2. Remove outer linkage-to-seat back panel at-
taching screws (See Fig. 15-71).
3. Remove lock handle, spring and bushing from
linkage.
Installation
1. Position bushing and spring on lock handle.
2. Install lock handle, bushing and spring into
position between seat back panel and outer
linkage making sure end of spring is engaged
in hole in outer link (Fig. 15-74).
3. Install lock handle attaching screw; then, in-
stall outer linkage to seat back panel attaching
screws (Fig. 15-71).
4. Install seat back trim assembly and outer
linkage cover.
SEAT
k /
LOCK
BACK
HANDLE
SEAT BACK LOCK
HANDLE KNOB
-^O-ENDS OF SPRING
>»
J ^ - ^
SEAT BACK LOCK
HANDLE SREW
- ^
1216
^ S '
Fig. 15-74-Seat Back Lock
FOLDING SECOND SEAT BACK PANEL AND
FILLER PANEL-Right or Left S e a t - " 6 5 " Styles
Removal and Installation
1. Remove seat back trim assembly, as pre-
viously described. Remove outer linkage cover.
2. Remove outer and inner linkage to seat back
attaching screws (Fig. 15-75). Remove seat
back lock handle, spring and bushing from be-
tween outer linkage and seat back panel; then,
remove seat back panel and rear floor filler
panel from linkage.
INNER LINKAGE TO
SEAT BACK SCREWS
OUTER LINKAGE T O _
SEAT BACK SCREWS
1218
Fig. 15-75 — Seat Inner and Outer Linkage
Advertisement
