Advertisement
14-22
DOOR, QUARTER AND SHELF TRIM
VIEW IN
CIRCLE C
VIEW IN CIRCLE B
1541
Fig. 14-37—Rear Quarter Trim Panel, Left Side - " A " Station Wagons
2. On "35" styles, fold back rubber mat from
wheelhouse. On "55 and 65" styles, remove
compartment side filler panel as described
in the "Seat" section of the body service
manual.
3. Beginning at outer edges and working toward
center, carefully break cement bond between
wheelhouse and trim cover and remove cover.
4. To install, reverse removal procedure. Prior
to installation, clean off old cement from
wheelhouse to assure a smooth cementing sur-
face. Install cover in position and scribe line
inside of folding seat back bumper cut-out to
guide installation when adhesive is applied.
Remove cover and apply trim adhesive over
wheelhouse surfaces contacted by trim cover
(Do not cover scribe lines). With trim cover,
"inside-out", align bumper cut-out with scribe
lines on wheelhouse. Apply cover to wheel-
house working from center of cover towards
outer edges.
REAR QUARTER REAR TRIM PANEL
(LEFT SIDE)-Chevrolet 13435 and
Pontiac 23335 Styles
The rear quarter rear trim panel on these styles
(left side) is constructed to a textured metal finish
and extends to include the wheelhouse; all in a
single panel.
Removal and Installation
1. Remove rear quarter front trim panel and
second folding seat back bumper assembly
from wheelhouse.
Advertisement
