Fisher Chevrolet 13000 series Service Manual page 223

9-14 TAIL GATE
TAIL GATE WINDOW
UPPER GLASS RUN CHANNEL
"X" BODY STYLES
Removal and Installation
1. Open tail gate and remove exposed clip at each
end of glass run channel securing channel to
body pillar at belt line.
2. Carefully break cement bond between run chan-
nel and retainer and remove run channel.
3. Remove screws to run channel retainer and
remove retainer.
4. Prior to installation of either run channel or
retainer, seal contact areas with medium
bodied sealer as depicted in Sections "A-A"
and " B - B " in Figure 9-26.
5. To install, reverse removal procedure.