Advertisement
REAR COMPARTMENT LID
8-5
3 / 8 "
1/2"
13
t_
3 / 4
140° BEND
3 / 8 "
2443
D R I L L 5 / 1 6 "
H O L E
Fig. 8-8—Tool J-22291 " E " Body Torque Rod Adjusting Tool
2. Slide retainer laterally to disengage it from
lock cylinder and remove lock cylinder assem-
bly and sealing gasket from rear end panel.
3. To install, reverse removal procedure.
REAR COMPARTMENT LID LOCK
CYLINDER ASSEMBLY-
Pontiac 26657 Styles
Removal and Installation
1. Open rear compartment lid. Working through
access holes provided in rear end panel, re-
move nuts securing lock cylinder assembly to
studs on rear end panel molding.
2. Move lock cylinder and shaft assembly forward
to enable disengaging shaft from cylinder and
remove shaft and cylinder from body.
3. To install, reverse removal procedure.
REAR COMPARTMENT LID LOCK
CYLINDER ASSEMBLY-
Oldsmobile "E" Styles
Removal and Installation
1. Open rear compartment lid.
Remove nuts
marked " 1 " securing lock cylinder assembly
to retainer (Fig. 8-12). Remove cylinder and
shaft assembly from outer rear compartment
lid.
2. To remove cylinder and shaft assembly from
escutcheon, remove nuts marked "2" (Fig.
8-12).
3. To install, reverse removal procedure.
LOCK CYLINDER
2481
Fig. 8-9—Rear Compartment Lid Lock Cylinder
Chevrolet " B " Shown
Advertisement
