Advertisement
13-2
FOLDING TOP
B & C 67 STYLES
WHEELHOUSE
RETAINER PLATE
RETAINER
RETAINER
BACK GLASS
SUPPORT ROD
VIEW A
BACK
CURTAIN
RETAINER CLIP
VIEWB
2372
Fig. 13-1 - " B & C " Body Back Glass Support Rod Attachments
9. Remove front roof r a i l front and r e a r
weatherstrips.
10. Detach top material from front roof rail (Fig.
13-2).
11. Detach top material flaps from side roof front
rail (Fig. 13-2).
12. Raise top and lock to windshield header.
13. At right and left side roof front and rear rails,
remove hold-down cable front and rear attach-
ing screws. (See Views "A and B" in Fig.
13-3).
14. Pull both hold-down cables forward until cables
are completely removed from top material
retaining pockets.
15. At underside of front bow, remove screws
securing listing pocket retainer to bow (Fig.
13-4).
16. Push top material upward sufficiently until re-
tainer is disengaged from bow; then remove
retainer from listing pocket.
17. Detach folding top compartment bag from rear
seat back panel, thus exposing rear quarter
and rear trim stick attaching bolts. Forward
end of top compartment bag may be tied or
wired to center roof bow to provide ready
access to attaching bolts (Fig. 13-5).
18. At each rear quarter area remove attaching
bolts securing rear quarter trim stick as-
sembly to rear quarter inner panel (Fig. 13-6).
Advertisement
