Advertisement
16-8
ELECTRICAL
IN-LINE CONNECTOR
FLAT TO ROUND
WIRE CONNECTOR
2172
Fig. 16-13 —Rear Quarter Window Wiring -
" A " Coupe Less 67 Styles
2. To check circuit breaker, disconnect the output
feed wire (the wire opposite the power source
feed to the breaker) from the breaker and with
test light, check terminal from which wire was
disconnected. If tester does not light, circuit
breaker is inoperative.
b. Checking Relay Assembly at Shroud
1. With test light, check relay feed. If tester
does not light, there i s an open or short cir-
cuit between relay and circuit breaker.
2. Turn ignition switch on and with test light
check output terminal of relay. If tester does
not light, the relay i s inoperative or there is
a short or open circuit between ignition switch
and relay assembly.
(Check fuse at dash
panel).
c. Checking for Current at Cut-Out S w i t c h -
Cadillac Only
1. Connect one test light lead to relay by-pass
Fig. 1 6 - 1 4 - L e f t Side Power Window Wiring - Oldsmobile " E " Optional
1. Flat to Round Wire Connector
3. Optional Door Courtesy Lamp
6. Door Courtesy Lamp Connector
2. Quarter Window Switch Block
4. Door Window Motor
7. Quarter Window Motor
5. Master Control Switch Block
Advertisement
