Advertisement
DOOR, QUARTER AND SHELF TRIM
14-21
VIEW IN CIRCLE "B'
VIEW IN CIRCLE " A
VIEW IN CIRCLE " C "
1540
Fig. 14-36—Rear Quarter Trim Panel, Right Side - " A " Station Wagons
4. With a putty knife, or other suitable flat-bladed
tool, disengage trim retaining clips from seal-
ing plugs along top of wheelhouse cover panel
and remove panel from body (see View
in Fig. 14-36).
(Qti
NOTE:
The trim retaining clips and corres-
ponding plastic sealing plugs are available as
service parts.
5. To install, reverse removal procedure.
REAR QUARTER REAR TRIM P A N E L -
AM Station Wagon Styles Except
13435 and 23335 Styles (LEFT SIDE)
Removal and Installation
1. On "35" styles, remove exposed screw at
bottom center of panel (see View "B" in Fig.
14-37).
2. Working from front to rear (with a flat-bladed
tool) disengage trim retaining clips from plas-
tic sealing plugs along upper edge of rear
quarter rear trim panel (see View "A" in
Fig. 14-37).
3. With an upward movement, remove panel from
body.
4. To install, reverse removal procedure.
WHEELHOUSE TRIM COVER ASSEMBLY
(LEFT S I D E ) - A l l " A " Station Wagon
Styles Except 23335 Styles
Removal and Installation
1. Remove rear quarter front and rear trim panel
assemblies and second folding seat back bum-
per assembly.
Advertisement
