Advertisement
REAR QUARTER
7-7
Fig. 7-8-Rear Quarter Hardware - " C - 4 7 " Styles Shown, "B-C 5 7 - 6 7 " Styles Similar
1. Quarter Window Assembjy
2. Window Regulator
(Manual)
3. Front Guide
4. Rear Guide
5. Window Upper Stop
6. Section Through Vertical
Inner Sealing Strip
7. Section Through Roof Rear
Drip Molding (With
Integral Outer Sealing Strip)
8. Window Regulator (Electric)
9. Window Lower Stop
REAR QUARTER WINDOW REAR GLASS
RUN CHANNEL-AII Closed Styles
Removal and Installation
channel retaining clips from piercings in side
roof rail.
NOTE:
If difficulty is encountered disengaging
run channel, inspect inside of channel for the
presence of screws.
1. Remove rear quarter window as previously
described.
2. Remove run channel to inner panel attaching
bolt (Fig. 7-20).
3. On "A-07" style, remove screws securing run
channel to side roof rail along length of run
channel.
5. At belt line on "A" styles, disengage tab on
rear run channel from side roof rail by moving
run channel downward into opening between the
panels; then, remove run channel from body.
6. Prior to installation, inspect foam sealing
material for any damage that would result in
waterleaks, and replace as necessary.
4. Using a flat-bladed tool, carefully pry run
7. To install, reverse removal procedure.
Advertisement
