Advertisement
15-26
SEATS
4. Pull seat back hinge arms outward sufficiently
to disengage hinge arm from hinge pin and
remove seat back from seat cushion.
5. To install, reverse removal procedure.
FRONT SEAT BACK LOCK (RIGHT OR LEFT)-
"F and Z" Body Standard Bucket Seats
Removal and Installation
1. Remove front seat back assembly, as pre-
viously described.
2. Remove seat back lock handle knob, lock handle
escutcheon and lock handle (See Fig. 15-30).
3. Remove seat back panel and detach seat back
trim outer side facing sufficiently to gain ac-
cess to lock attaching bolts (Fig. 15-30).
4. Remove seat back lock attaching bolts (Fig.
15-30) and remove seat back lock from seat
back.
SEAT BACK
LOCK BOLTS
KNOB SET SCREW
SEAT BACK
INNER ATTACHING
BOLTS
CUSHION SIDE PANEL
REAR SUPPORT
SEAT BACK OUTER BOLTS
2205
Fig. 1 5 - 3 0 - S e a t Back Lock - " F & Z " Bucket Seat
Fig. 15-31 — Strato Full Width Seat Back Attachment
5. To install, reverse removal procedure. Check
for proper operation of seat back lock.
"STRATO" FRONT SEAT BACK ASSEMBLY
(RIGHT OR LEFT)-Full Width S e a t -
All Styles Except 16639 Style
Removal and Installation
1. Remove front seat assembly as described
under, "Full Width Front Seat Assembly -
Removal and Installation
7
\
2. At side of seat from which seat back is being
removed, remove hog rings securing cushion
side trim at rear of seat and fold trim forward
sufficiently to expose two seat back outer at-
taching bolts (Fig. 15-31).
3. At inboard side of seat back, remove screw
securing inner attaching bolt cover plate and
remove cover plate.
4. Remove seat back inner attaching bolts; then,
remove outer attaching bolts and remove seat
back assembly from seat.
5. To install seat back assembly, reverse re-
moval procedure. Make certain seat side panel
support (Fig. 15-31) is secured under seat
back outer attaching bolts.
Advertisement
