Advertisement
15-20
SEATS
seat side panel, remove seat side panel; then,
remove lock push button and ferrule (Fig.
15-20).
3. Remove seat back outer panel. Remove hog
rings securing seat back panel or seat back
trim panel along bottom and sides of seat.
If removing lock, turn up seat back trim suf-
ficiently to gain access to lock attaching bolts.
If removing lock control or rod turn up trim to
gain access to lock control bolts (See Figure
15-21).
4. a. To remove seat back lock, disengage lock
rod clip at lock (Fig. 15-21) and detach rod
from lock.
Remove lock attaching bolts
(Fig. 15-21) and remove lock from bottom
of seat back.
b. To remove seat back lock control, dis-
engage lock rod clip at control (Fig. 15-21)
and detach lock rod from control. Remove
lock control attaching bolts (Fig. 15-21) and
remove lock control from seat back.
c. To remove lock rod, disengage lock rod clip
at lock and at control (Fig. 15-21), detach
lock rod from control and lock and remove
lock rod from seat back.
5. To install seat back lock, lock control or lock
rod, reverse removal procedure. Make cer-
tain lock rod and clips are properly engaged
and locked at lock lever and lock control lever.
Check for proper operation of seat back lock.
VIEW A
LOCK ROD CLIP
2 4 5 6
Fig. 15-21-Front Seat Back Lock - " C & E" Body Two-Door Styles, Standard Full Width Seat
Advertisement
