Advertisement
6-54
DOORS
8
ft
*
y
10 '
ii m
m
:
w'C
p .
1 /
6
J ^
\
;^
v
; a
^ >*
H ^ H
——-^y^^^^
^
2104
Fig. 6-75 — Front Door Hardware - " E " Styles
1.
2.
3.
Trim Pad Adjusting Plates
Window Regulator Attaching
Bolts
Front Guide Center
Adjusting Stud and
Nut
4.
5.
Front Guide Lower
Adjusting Stud and
Nut
Remote Control (Standard)
Attaching Bolts
6.
7.
8.
Inner Panel Cam
Attaching Bolts
Glass Sash Channel
Rear Attaching Screws
Window Rear Up-Travel Stop
9. Rear Guide Center Adjusting
Stud and Nut
10. Rear Guide Lower Adjusting
Stud and Nut
2. Position window to expose cam attaching
screws (see Fig. 6-71 for "E" Bodies, Fig. 6-
72 for "F" Bodies and Fig. 6-73 for " Z "
Bodies).
3. "F & Z'
;
Body Styles have one front and one
rear sash channel cam attaching screw. " E "
Body Styles have two front and two rear sash
channel cam attaching screws. On some of
these styles, removal of all sash channel cam
attaching screws requires different positioning
(front to rear) of window assembly.
4. Supporting glass with one hand, disengage cam
from
regulator
rollers and remove cam,
Lower glass to door bottom.
5. To install, reverse removal procedure.
FRONT DOOR WINDOW SASH
CHANNEL GUIDE PLATE-
"A-17-39 and 67" Styles
The guide plate is attached to the window sash
channel by two bolts and acts in the dual capacity of
window guide and rear up-travel stop.
Advertisement
