Download Print this page

Fisher Chevrolet 13000 series Service Manual page 312

1967 body manual

Advertisement

DOOR, QUARTER AND SHELF TRIM
14-11
a. Remove rear seat back and cushion assem-
blies as described under "Rear Seats''.
b. On " C " Body "47" Styles equipped with
shoulder straps, remove shoulder strap
buckle retainer as described in "Seat Belt"
Section.
c. On convertibles styles, remove exposed
screws securing front and rear of folding
top compartment side trim panel (Fig.
14-21).
d. On styles equipped with seat back to rear
quarter inner panel filler panel, remove at-
taching screws and remove filler panel
(except " F " Bodies). On "F" bodies filler
panel is removed with trim pad and arm
rest as an assembly. (Fig. 14-20 and 14-22
illustrate typical Attachment).
e. On all styles remove all arm rest attaching
screws present at front, rear and bottom of
arm rest assembly.
f. On styles equipped with rear quarter lamp
assemblies, disconnect lamp as shown in
Fig. 14-23.
g. On styles with other electrical devices in
arm rest assembly, carefully detach arm
rest from rear quarter inner panel suffi-
ciently to disconnect wire harness con-
nectors. Figures 14-24 and 14-25 are
indicative of electrical installation in rear
quarter arm rests. Lift arm rest in an up-
ward, inboard movement and remove as-
sembly from
rear quarter inner panel
(except " E " & "F" Bodies).
NOTE:
On convertible styles (except " F "
Bodies), folding top compartment side panel
and arm rest are removed as an assembly.
As a bench operation, the arm rest assem-
bly can be removed from the folding top
compartment side trim assembly by remov-
ing screws installed on reverse side.
NOTE:
On all Cadillac " E " Bodies and
certain " F " Body styles, the arm rest is
an integral part of the quarter trim assem-
bly and must be removed as an assembly
with the quarter trim. In addition, the rear
seat to quarter inner panel filler panel or
folding top compartment side panel is also
removed as part of the quarter trim as-
sembly on " F " Body styles.
RETAINER
*
FILLER P A N E L
VIEW C
1253
Fig. 14-20—Rear Quarter Trim Assembly (Insert Type) with Floor Mounted Arm Rest

Advertisement

loading