Advertisement
ELECTRICAL
16-3
Fig. 1 6 - 2 - F r o n t End Power Window Wiring -
Chevrolet " B " Styles
1. Front Door Wiring
2. Cross-Over Harness
3. To Circuit Breaker
4. Power Window Wiring
Connector
5. Ignition Relay
CROSS-OVER HARNESS
This harness is installed beneath the instrument
panel and completes the circuit from the right door
to the left door windows on all styles except on
Cadillac styles (See Figs. 16-1 through 16-6).
On Cadillac "C" styles the cross-over harness is
part of the body and rear door or quarter feed har-
ness and is installed under the front seat (See Fig.
16-7).
On Cadillac "E" styles the cross-over harness is
installed at the front of the floor pan (See Fig.
16-8).
Fig. 1 6 - 3 - F r o n t End Power Window Wiring -
Pontiac " B " Styles
1. Front Door Wiring
2 . Power Window Wiring
Connector
3. Body Wiring Connector
4 . To Circuit Breaker
5. Cross-Over Harness
Fig. 1 6 - 4 - F r o n t End Power Window Wiring -
Oldsmobile " B - C & E" Styles
A . Front Door Wiring
B. Ignition Relay
C. Power Seat Feed
on 38439-67 and
38669 only
D . To Circuit Breaker
E . To Fuse Block
F . Power Window Wiring
Connector
G . Cross -Over Harness
FEED HARNESS FOR REAR DOORS
OR QUARTER WINDOWS
This harness connects to the front cross-over
harness on the left side of the shroud (fire wall)
and extends rearward under the body wire harness
on all styles except Chevrolet "F" and Cadillac. In
two door styles the quarter window harness divides
at the rear of the rear seat on all styles except
Chevrolet "F" and Cadillac (See Figs. 16-9 through
16-16).
Fig. 16-5— Front End Power Window Wiring -
Buick " B " Bodies
1. Front Door Wiring
2. Ignition Relay
3. Power Window Wiring Connector
4. To Fuse Block
5. To Circuit Breaker
6. Cross-Over Harness
Advertisement
