Advertisement
6-116
DOORS
REAR DOOR WINDOW REGULATOR
ASSEMBLY-"A-Z 39" Styles
Removal and Installation
1. Remove door trim pad and detach inner panel
water deflector.
2. Remove rear door window.
3. On "A" body electric styles, disconnect motor
from wire harness.
4. Remove regulator attaching bolts and remove
regulator assembly (See Fig. 6-150).
5. To install, reverse removal procedure.
REAR DOOR WINDOW REGULATOR
ELECTRIC MOTOR REMOVAL- All Styles
If it is necessary to remove the electric motor
from the regulator, refer to "Front Door
7
' section
for the proper procedure. The tension on the lift
arm assist spring can cause serious injury if the
motor is removed without use of the cautionary
measures described in the procedure.
Advertisement
