Advertisement
6-96
DOORS
INSIDE LOCKING ROD
CONNECTING LINK BOLT
REMOTE CONTROL BOLTS
f-ig. 6-121 —Door Lock Remote Control -
" B " Style Shown - Other Similar
REAR DOOR LOCK VACUUM
ACTUATOR-68069 and 68169 Styles
Removal and Installation
1. Remove door trim assembly and inner panel
water deflector.
2. Disconnect inside locking rod from door lock
spring clip (Refer to Front and Rear Door
section under "Door Lock Spring Clips'' for
disengagement).
3. Remove inside locking to lock connecting rod
link bolt (Fig. 6-124).
4. D i s c o n n e c t vacuum hoses from vacuum
actuator.
5. Remove vacuum actuator and link assembly at-
taching screws (Fig. 6-124 and 6-125).
6. Pivot (rotate) actuator and linkage assembly,
then, pull connecting rod forward through link-
age. Remove actuator assembly from door.
7. To install, reverse removal procedure. Check
lock operation prior to installing w a t e r
deflector.
INSIDE LOCKING ROD
TO LOCK CONNECTING
ROD LINK BOLT
1 0 M
Fig. 6-122 —Rear Door Lock Removal -
Hardtop Style Shown,
Closed Style Similar
REAR DOOR INNER PANEL C A M -
AM Except "X" Styles
Removal and Installation
1. Remove door trim assembly and inner panel
water deflector.
2. JRemove inner panel cam attaching bolts (Figs.
6-126 and 6-127). Disengage cam from regula-
tor balance arm roller and remove cam from
door.
3. To install, reverse removal procedure. Adjust
front end of cam for proper window operation.
Correct adjustment of cam will prevent a
rotated (cocked) door window.
WINDOW LOWER SASH CHANNEL
C A M - A I I Except "X" Styles
Removal and Installation
1. Remove door trim assembly and inner panel
water deflector.
Advertisement
