Advertisement
DOOR, QUARTER AND SHELF TRIM
14-19
at the belt line by a folding catch type handle. To
remove the panel, disengage the catch and lift the
panel upward.
To install, r e v e r s e
removal
procedure.
The handle can be adjusted "in" or "out" to in-
crease or decrease closing effort. To adjust, loosen
the handle attaching screws; position the handle as
desired and tighten the screws.
REAR QUARTER WHEELHOUSE COVER
PANEL (RIGHT S I D E ) -
" B " Body Station Wagon Styles
Removal and Installation
1. Remove spare tire cov^r.
2. Remove rear quarter stationary window front
and lower garnish moldings.
3. Remove all screws securing trim panel to
rear quarter inner panel (Fig. 14-35).
4. With a suitable flat-bladed tool, carefully dis-
engage trim retainers from rear quarter inner
panel along leading edge of rear body lock
pillar (on front edge of rear quarter front trim
PINCHWELD
REAR QUARTER
FRONT TRIM
FRONT
Fig. 14-33—Rear Quarter Trim Assembly
assembly). (Fig. 14-35).
5. Remove spare tire cover support.
6. Lift assembly upward slightly to disengage
from rear quarter inner panel and remove
assembly from body.
7. To install, reverse removal procedure.
REAR QUARTER
TRIM ASSEMBLY
REAR QUARTER
FRONT TRIM
TAIL GATE
WINDOW SWITCH
COURTESY
LIGHT
RETAINER
2309
Fig. 14-34—Rear Quarter Trim Panel Left Side - " B " Station Wagons
Advertisement
