Advertisement
GENERAL INFORMATION
1-1
SECTION 1
GENERAL INFORMATION
INDEX
Subject
Page
Manual Description
1-1
Introduction
1-1
Index
1-1
Page and Figure Numbers
1-1
Reference Tabs
1-1
Text
1-1
Illustrations
1-1
Body Number Plate
1-1
Model Identification
1-1
Introduction
1-1
Subject
Page
Body Style Number
1-2
Body Style Number Series
1-2
Body Style Number Suffix
1-2
Body Type Name
1-2
Body Type Letter
1-2
Wood Grain Treatment
1-3
Description
1-3
Removal
1-3
Installation
1-3
MANUAL DESCRIPTION
INTRODUCTION
This publication contains the essential removal,
installation,
adjustment
and maintenance
pro-
cedures for servicing all 1967 Fisher Body Styles.
This information is current as of time of publica-
tion approval.
INDEX
The preceding page contains a "Table of Contents'
7
which lists the section number and subject title of
each main body area section. The first page in
each main body area section has an index to the
subjects included in that section. An alphabetic
index covering the entire manual is located in
section 18.
PAGE AND FIGURE NUMBERS
All page numbers and figure numbers consist of
two sets of digits separated by a dash. The digits
preceding the dash identify the main body area sec-
tion. The digits following the dash represent the
consecutive page number or figure number within
the particular body area section.
REFERENCE TABS
The first page of each section is marked with a
ready-reference black tab corresponding with the
table of contents page.
TEXT
Unless otherwise specified, each service procedure
covers all body styles. Procedures covering speci-
fic styles are identified by the style number, body
series number, body type letter or similar designa-
tion. A description of these designations is covered
in this section under "Model Identification".
ILLUSTRATIONS
Where possible, illustrations are placed in close
proximity to the accompanying text and should be
used as part of the text.
BODY NUMBER PLATE
The body number plate identifies the body style,
body assembly plant, body number, trim combina-
tion number, paint code and time built code (Fig.
1-1). On Corvair styles, the body number plate is
attached to the left side of the motor compartment
cross rail. On Cadillac "C" & "D" styles, the
plate is located on the left upper portion of the
horizontal surface of the cowl. On all other cars,
the plate is located on the left upper portion of the
vertical surface of the dash firewall.
MODEL IDENTIFICATION
INTRODUCTION
Due to the wide variety of body styles available,
certain body styles have been grouped in this
publication as an aid to identification. These group
designations may be used individually or in various
combinations. An explanation of the principal cate-
gories follows:
Advertisement
