Advertisement
6-102
DOORS
FRONT GUIDE
EXTENSION
SASH CHANNEL
STOP
STOP BOLT
VIEW A
2092
Fig. 6-133-Window Front Up-Stop - " A - 3 9 " Style
Removal and Installation
("B-35-45 and 69" Styles)
1. Remove door trim assembly and inner panel
water deflector.
2. On 35000 Series "69" Styles, lower window
approximately 3" down from full-up position.
Remove lower sash channel rear guide plate
attaching screws through upper rear access
hole and remove guide plate (Fig. 6-126).
STOP BOLT
^
\
^ REAR
1
GUIDE
\ ^ \
r
EXTENSION
\ \
S
STOP
2093
ARROW A
A R R O W
B
2378
Fig. 6-135 —Glass Run Channel Retention -
" B " Closed Styles
3. Operate window to position shown in Figure
6-126 and remove lower sash channel cam
attaching screws (window slightly down on
electric styles and full down on manual).
4. Remove glass run channel front and rear at-
taching bolts (Fig. 6-135).
5. Pivot window in opening (raise front edge) to
disengage front and rear edges of glass from
glass run channel, then remove window inboard
of door upper frame.
6. To install, reverse removal procedure.
Fig. 6-136 —Rear Door Window Assembly -
" C - 6 9 " Styles Except 68069-169 Styles
Fig. 6 - 1 3 4 - W i n d o w Rear Up-Stop - " A - 3 9 " Style
1. Rear Door Window Assembly
5. Glass to Sash Channel
2. Lower Sash Channel Assembly
Bolts
3. Lower Sash Channel Upper
6. Sash Channel Bolt
Outer Filler
4. Lower Sash Channel
Lower Outer Filler
Spacers
7. Glass to Sash Channel
Bolt Nuts
Advertisement
