Advertisement
LUBRICATION
2-1
SECTION 2
LUBRICATION
Subject
Instrument Panel Compartment Door
Front Door Hinge Hold-Open Assembly
. . . .
Rear Door Hinge Hold-Open Assembly
Door Lock Fork Bolt and Rotary Bolt
Door Lock Striker
Door Jamb Switch
Door Lock Mechanism and Lock Parts
Front Compartment Lid Lock
Door Window Regulator and Cams - Styles
with Upper Frames
Door Window Regulator Cams and Guides - Styl(
without Upper Frames
INDEX
Page
Subject
2-1
2-1
2-1
2-1
2-1
2-2
2-2
2-2
2-2
2-2
DESCRIPTION
The movable mechanical parts of the body are lu-
bricated at the factory to insure proper and quiet
operation. If additional lubrication is required, the
following specified materials or their equivalents
should be used at the locations listed.
INSTRUMENT PANEL COMPARTMENT
DOOR HINGE
Wipe off dirt and apply a sparing amount of dripless
oil to the hinge frictional points. Operate door and
wipe off excess lubricant.
FRONT DOOR HINGE HOLD-OPEN
ASSEMBLY
Wipe off dirt and apply engine oil to points indicated
(Fig. 2-1).
Page
Rear Quarter Window Regulator Cams and Guides.
2-4
Rear Compartment Lid Lock
2-5
Rear Compartment Hinges and Torque Rods . . .
2-5
Tail Gate Window Regulator and Cams
(Station Wagon)
2-5
Tail Gate Lock Striker (Station Wagon)
2-5
Tail Gate Hinges (Station Wagon)
2-5
Gas Tank Filler Door Hinge
2-5
Folding Seat Linkage
2-5
Front Seat Adjuster Mechanism
2-6
Convertible Top Linkage
2-6
I
Fig. 2-1 —Front Door Hinge Hold-Open Assembly
Fig. 2-2 —Rear Door Hinge Hold-Open Assembly
REAR DOOR HINGE HOLD-OPEN
ASSEMBLY
Wipe off dirt and apply a light coat of Lubriplate
to frictional points (Fig. 2-2).
Wipe off excess
lubricant.
DOOR LOCK FORK BOLT A N D
ROTARY BOLT
Wipe off dirt and apply a thin coat of stick-type
lubricant and oil (Fig. 2-3 and 2-4).
DOOR LOCK STRIKER
Wipe off dirt and apply a thin coat of stick-type
lubricant to top surface of striker teeth at areas
indicated (Fig. 2-5).
Advertisement
