Advertisement
DOOR, QUARTER AND SHELF TRIM
14-5
LEFT
3 ^ — ~ -
FRONT DOOR
I
RIGHT
J
FRONT DOOR
1663
Fig. 14-10—Front Door Arm Rest Switch Cover Assembly -
Olds. Style Shown, Others Typical
6. On styles equipped with arm rest cup, remove
screws from cup (38457 and 69 Styles).
7. On all Cadillac Styles, remove door courtesy
lamp lens and disconnect lamp from wiring
harness connector and remove screw behind
lens. This screw is inserted through door trim
pad into door inner panel. (Fig. 14-11)
TRIM PAD
RETAINING
SCREW
7
LAMP LENS
Fig. 14-11-Door Trim Courtesy Lamp - Cadillac " E " Body
(Other Cadillacs Similar)
8. Remove all screws present, down sides and
along bottom of door trim pad.
9. Starting at a lower corner, insert tool J-6335
between door inner panel and trim assembly.
Working upward, carefully disengage retaining
nails from plastic cups inserted in door inner
panel (Fig. 14-12).
PLASTIC RETAINER CUP
RETAINING NAIL
VIEW IN CIRCLE A
REMOTE CONTROL PADDLE HANDLE
ARM REST HANGER PLATE
TRIM UPPER FINISHING MOLDING
SECTION B-B
SECTION D-D
VIEW C
REST
1680
Fig. 14-12—Door Trim Pad Removal
Advertisement
