Advertisement
14-26
DOOR, QUARTER AND SHELF TRIM
\
VIEW - A
VIEW - B
VIEW - C
2525
Fig. 14-41—Compartment Shelf Trim Panel - Cadillac " E " Styles
7. Re-cement compartment shelf trim assembly
valance to front of metal shelf panel using non-
staining vinyl trim adhesive.
8. To install, reverse removal procedure.
COMPARTMENT SHELF CENTER
FINISHING PANEL-Oldsmobile and
Buick "E" Styles
Removal and Installation
1. Remove rear seat cushion and seat back as-
semblies as described under "Rear Seats".
2. From inside rear compartment, remove com-
partment shelf center finishing panel attaching
nuts at locations shown in Section "A-A" in
Figure 14-39.
3. From inside body, pull center finishing panel
forward sufficiently to disengage both front and
rear edge of center finishing panel from re-
tainers (see View "B", Fig. 14-39); then, lift
panel upward and remove from shelf panel.
4. To install, reverse removal procedure.
COMPARTMENT SHELF SIDE FINISHING
PANELS-Oldsmobile and Buick "E" Styles
1. Remove compartment shelf center finishing
panel.
2. a. On 39487 style, remove seat back filler
panel attaching screw (Fig. 14-40).
b. On 39687 and 49487 styles, remove rear
Advertisement
