Advertisement
2-2
LUBRICATION
Fig. 2-3 —Door Lock Fork Bolt and Rotary Bolt
DOOR JAMB SWITCH
Wipe off dirt and apply a thin coat of Lubriplate to
end surface of switch plunger and remove excess
lubricant.
DOOR LOCKING MECHANISM AND
LOCK PARTS
Apply Lubriplate to pivot points at ends of con-
necting rods and moving parts of lock.
FRONT COMPARTMENT LID LOCK
On front compartment lid lock apply a thin coat of
Lubriplate to contact point as indicated (Fig. 2-6).
DOOR WINDOW REGULATOR AND
CAMS—STYLES WITH UPPER FRAMES
Apply a coat of Lubriplate to areas indicated, (Fig.
2-7). Lubrication of front and rear doors with up-
per frames is typical.
DOOR WINDOW REGULATOR CAMS
AND GUIDES—STYLES WITHOUT
UPPER FRAMES
Apply a coat of Lubriplate to areas indicated. (Fig.
2-8). Lubrication of front and rear doors without
upper frames is typical.
Fig. 2-4— Door Lock Fork Bolt and Rotary Bolt
Fig. 2 - 5 - D o o r Lock Striker
Advertisement
