Fisher Chevrolet 13000 series Service Manual page 179

7-8 REAR QUARTER
REAR QUARTER WINDOW FRONT GLASS
RUN CHANNEL-AII Closed Styles
Removal and Installation
1. Remove rear quarter window as previously
described.
2. On "A" styles, remove screws along length of
run channel securing channel to body (Fig.
7-20).
3. On all styles, using a flat bladed tool, pry run
channel from body pillar and remove run chan-
nel (Fig. 7-21).
4. To install, reverse removal procedure. Prior
to installation inspect sealing material on body
pillar or run channel and replace or add to as
required.
REAR QUARTER WINDOW GUIDE
ASSEMBLY-"X-11" Styles
Removal and Installation
1. Remove rear quarter trim assembly and trim
finishing upper molding.
2. Detach inner panel water deflector sufficiently
to gain access to guide attaching screws.
3. Remove guide attaching screws, disengage
guide from roller on regulator arm and remove
guide through access hole (See Fig. 7-22).
4. To install, reverse removal procedure.
Fig. 7-9-Rear Quarter Hardware - Buick " E " Styles
1. Rear Guide
2. Regulator Lift Arm Cam
3. Up-Stop '
4. Front Guide
5. Regulator (Manual)
6. Regulator (Electric)