Download Print this page

Fisher Chevrolet 13000 series Service Manual page 190

1967 body manual

Advertisement

REAR QUARTER
7-19
SASH CHANNEL CAM
REGULATOR LIFT ARM
(AND ROLLER)
FRONT GUIDE LOWER
ADJUSTING STUDSO
2247
3. Slide rear quarter window upward and forward
and pivot top rear corner of glass to a point
outboard of side roof rail. Continue movement
of glass upward and forward to disengage front
glass rollers from front guide assembly and
remove rear quarter window from body.
4. To install, reverse removal procedure. Figure
7-39 is an exploded view of the quarter window
assembly and identifies the various components
and their assembly sequence.
ADJUSTMENTS-"Z-37" Styles
1. The quarter window up-stop can be utilized for
adjustments of glass to side roof rail weather-
strip (see Section "A-A" in Fig. 7-40).
2. The rear guide can be adjusted to gain proper
fore and ait contact of rear quarter window
vertical weatherstrip to rear edge of front door
window (see section "C-C" and " F - F " in Fig.
7-40).
Fig. 7-27—Rear Quarter Window Removal -
" A - 1 7 and 67" Styles
and rear guide adjusting stud nuts. Operate
window to "full-up" position and tighten upper
adjusting stud nuts. Operate window to "full-
down" position and tighten remaining stud
nuts.
NOTE:
When adjusting studs on front guide,
make certain that adjacent studs are adjusted
equally to prevent creation of a bind between
cam channels.
5. To limit up-travel of window, adjust window
stop as required (see Fig. 7-14).
6. The quarter
window front
guide
is
also
equipped with an adjustable down-travel stop
(see Fig. 7-14).
F. REMOVAL AND INSTALLATION-
"Z-37" Styles
1. With window in full-up position, remove rear
guide upper and lower attaching bolts (Fig. 7-
38). Disengage guide from roller on window
assembly and remove guide.
2. Remove regulator as described in a following
procedure (see index).
Fig. 7-28—Rear Quarter Hardware - " E " Body
1. Rear Guide Attaching
Bolts
2. Front Guide Upper
Adjusting Studs
and Nuts
3. Up-Stop Attaching
Bolts
4. Regulator Lift Arm Cam
Attaching Nuts
5. Front Guide Lower
Attaching Bolt
6. Regulator Attaching Bolts
(4 for Electric,
5 for Manual)

Advertisement

loading