Advertisement
DOORS
6-5
THIS FASTENER
UNDER TRIM PAD
C-l
OF LAST
FASTENER
OF FIRST
FASTENER
FASTENER
SECTION A-A
WEATHERSTRIP
,'
Fig. 6-3 — Door Weatherstrip - Attachment
Under Trim Assemblies
so that it will not properly seal the door, replace-
ment of the deflector is required.
The following procedure covers complete removal
and installation of the water deflector. If only
partial removal of the deflector is required, per-
form only those steps which are necessary to
expose the required area of the door inner panel.
S E C T I O N A - A
jfi^^^
9 I
/ • / JMj
NOTE
POSITION
WEATHERSTRIP
COLOR CODED
AREA HERE
/
1581
Fig. 6-5 — Rear Door Weatherstrip
of deflector. Make certain tool blade is be-
tween inner panel and string that is imbedded
in sealer (Fig. 6-7).
Removal
1. Remove door trim assembly.
2. Remove waterproof body tape securing top of
water deflector to door inner panel.
3. Using a flat-bladed tool such as a putty knife,
carefully break cement bond between water
deflector and door inner panel down both sides
COLOR
VIEW IN CIRCLE A
SECTION B-B
V I E W I N CIRCLE A
Fig. 6-4—Front Door Weatherstrip
Fig. 6-6 —Door Bottom Drain Hole Sealing Strips
Advertisement
