Advertisement
DOORS
6-105
Fig. 6-139 —Rear Door Window Assembly -
68069-68169 Style
1. Door Window Glass
2. Rear Stop to Sash
Channel Screw
3. Window Rear Stop
4 . Glass to Lower Sash
Channel Bolt
5. Window Lower Sash
Channel
6.
7.
8.
Window Lower
Sash Outer
Filler
Glass to Lower Sash
Channel Spacer
Glass to Lower Sash
Channel Nut
to sash channel spacers. When installing nuts on
glass to sash channel attaching bolts, torque to
72 inch lbs. (6 foot lbs.)
Removal and fastallation
1. Remove rear door trim assembly and inner
panel water deflector.
2. With glass in full-up position, remove front and
rear up-travel stop attaching bolts, two bolts
on front stop, one on rear (Figs. 6-140 and
3. Lower glass approximately 2" and remove
lower sash channel cam attaching screws (Fig.
6-142).
4. While supporting glass by pressing it rearward
into ventilator division channel, remove lower
sash channel to guide plate attaching nuts
(Fig. 6-141).
5. Disengage lower sash channel from weld-on
studs on sash channel guide plate and remove
window assembly from door.
REAR UPPER STOP BOLT
FRONT UPPER STOP
BOLTS
PANEL CAM BOLT
FRONT GUIDE SUPPOR
BRACKET BC
Fig. 6-140 —Rear Door Window Removal - 68069-68169 Styles
Advertisement
