Advertisement
SEATS
15-43
SEAT BACK SUPPORT BOLTS
SEAT BACKTRIM SCREWS
Fig. 15-54-Folding Third Seat Back
2. At both sides of third seat back panel remove
seat back linkage bolt (Fig. 15-55) and bolt
securing seat back panel to support (Fig.
15-55); then remove seat back panel assembly
from body.
3. To install, reverse removal procedure.
COMPARTMENT FLOOR PANEL ASSEMBLY
(AT KICK-UP)-AII Styles
Removal and Installation
1. On "45" Styles, remove folding 3rd seat back
assembly as previously described.
2. On " 3 5 " Styles, remove luggage compartment
front and rear panel assemblies (complete) as
previously described.
3. Directly under rear edge of compartment floor
panel remove four screws securing panel to
floor pan.
4. At front of compartment floor panel remove
five screws securing panel to floor pan; then,
remove compartment floor panel from body.
5. To install, reverse removal procedure.
REAR FLOOR FILLER PANEL-AM Styles
Removal and Installation
1. Remove compartment floor panel assembly
(at kick-up) as previously described.
2. Along rear edge of filler panel, remove screws
which secure panel to floor pan.
3. Fold filler panel forward sufficiently to remove
screws which secure panel to folding 2nd seat
back assembly and remove filler panel from
body.
4. To install, reverse removal procedure.
SECOND SEAT CUSHION
(FULL WIDTH OR SPLIT SEAT)-All Styles
Removal and Installation
1. Lift up front edge of folding rear seat cushion
assembly to disengage seat bottom frame from
slots in rear seat support on floor pan; then,
remove cushion assembly from body and place
on a clean protected surface.
2. To install, reverse removal procedure. Make
certain that seat cushion frame is fully engaged
in supports on floor pan.
FOLDING SECOND SEAT BACK TRIM
ASSEMBLY (FULL W I D T H OR SPLIT S E A T ) -
All Styles
Removal and Installation
1. Raise folding second seat back and remove
second seat cushion.
2. On underside of second seat back panel, re-
move screws securing seat back trim assem-
bly to seat back panel.
L I N K A G E ^
SPRING W A S H E R -
BOLT -
BOLT
/^PRING WASHER
^M^J
BUSHING
1909
Fig. 15-55— Third Seat Back Panel and Linkage
Advertisement
