Advertisement
DOOR, QUARTER AND SHELF TRIM
14-23
VIEW D
1256
Fig. 14-38-Rear Quarter Trim Panel, Left Side - Pontiac 23335 Style
2. Remove all screws at front, rear and bottom of
rear trim panel (see Fig. 14-38).
3. Working from front to rear (with a flat bladed
tool), disengage trim retaining clips from plas-
tic sealing plugs and remove trim assembly
from body (see View "D" in Fig. 14-38).
NOTE:
The trim retaining clips and corre-
sponding plastic sealing plugs are available as
service parts.
4. To install, reverse removal procedure.
REAR QUARTER REAR TRIM PANEL-
Chevy II Station Wagons
Removal and Installation
1. Remove rear quarter belt finishing moldings
(front molding only right side).
Disengage
pinchweld finishing strip from rear body lower
lock pillar pinchweld flange. Carefully break
cement bond between overlapping edge of trim
assembly and pinchweld flange.
2. Remove screws at front and rear of rear trim
panel and remove trim panel from body.
NOTE:
On styles with electric tail gate drop-
ping window, remove screws securing window
switch in left rear trim panel and disconnect
switch from feed wire connector before re-
moving trim panel from body.
3. To install, reverse removal procedure. Prior
to installation, apply trim cement to pinchweld
flange surface contacted by overlapping for-
ward edge of trim assembly to assure good
retention.
Advertisement
