Advertisement
16-28
ELECTRICAL
DOME LIGHT
FEED-ORANGE
GROUND-WHITE
REAR QUARTER COURTESY
LAMP WIRING
LAMP SWITCH GROUND
WHITE-BLACK STRIPE
LAMP SWITCH
GROUND BLACK
UP-CYCLE WIRE
TAPED BACK
LAMP FEED
ORANGE-BLACK STRIPE
TAIL GATE WINDOW CONTROL
SWITCH BLOCK (16000 SERIES ONLY)
2518
Fig. 16-40 —Left Side Wiring - Chevrolet and Pontiac " B " Bodies
breaker a relay is used in the circuit which pre-
vents the operation of the seat until the ignition
switch is turned "on".
The seat adjuster operating mechanism incorpo-
rates a transmission assembly which includes two
solenoids and four drive cables on bench type seats
and two drive cables on bucket seats, leading to
the seat adjusters. One solenoid controls the rear
vertical movement of the seat while the other
solenoid controls the horizontal movement of the
seat.
When the control switch is actuated, the
motor and one of the solenoids are energized
simultaneously. Then the solenoid plunger causes
the shaft dog to engage with the large gear dog.
TAIL GATE WINDOW
CONNECTOR
BODY WIRE
CONNECTOR
BODY
WIRE
HARNESS
CONNECTOR
DOME
LIGHT
WIRE HARNESS
CONNECTOR
POWER TAIL
GATE
W I N D O W
WIRE HARNESS
CONNECTOR
Fig. 1 6 - 4 1 - F r o n t End Wiring - A l l " A "
Bodies
Fig. 16-42 — Front End Wiring - Chevrolet,
" B "
Body
Advertisement
