Advertisement
UNDERBODY
3-11
Fig.
Ref.
Dimension
CC
70-5/32
Location
of outer holes in attaching pad
(See Fig. 3-12) to gage hole in
lower flange of rear spring front
support on opposite side of body.
Front face of dash lower attach-
ing pad directly under centerline
of outer holes in attaching pad
(See Fig. 3-12) to gage hole in
lower flange of rear spring front
support on same side of body.
Vertical Dimensions (Complete Underbody)
(See Figure 3-8 and 3-7)
a
11-9/16
b
9-3/16
c
18-5/16
d
9-11/32
e
9-1/16
f
7-23/32
g
9-13/32
h
5-3/4
i
17-13/32
13-7/8
(Sedan &
Coupe)
12-1/32
(Sta. Wag.)
15/32" gage hole at front of
skirt side rail.
Lowest point of front suspension
lower control arm adjusting cam
guide (See Fig. 3-10).
Center of front suspension upper
control arm rear attaching stud
center of thread end (See Fig.
3-11).
Joint of front end skirt assembly
and dash lower attaching pad
on line even with bottom surface
of b o t h
members (See Fig.
3-12).
Lower surface of dash front
brace at center of forward gage
hole.
Lower surface of dash front
brace at rear gage hole.
Lower surface of floor pan
cross brace at 11/32" gage hole.
Lower surface of rear spring
front support at gage hole in
lower flange.
Lower surface of compartment
pan side rail at 1/4" unthreaded
gage hole at center of kick-up
area.
Lower surface of compartment
pan side rail spring support re-
inforcement at rear bumper at-
taching bolt hole (See Fig. 3-13).
FRONT
OF CAR
FRONT END SKIRT -
TO - DASH LOWER PAD
OUTER ATTACHING BOLTS
FRONT END
SKIRT ASSEMBLY
LOWER ATTACHING
PAD ( O N BODY )
REFERENCE POINT LOCATION
FOR HORIZONTAL
DIMENSIONS
B- B AND C - C A N D VERTICAL
DIMENSION E
1844
Fig. 3-12—Front End Skirt-to-Dash Lower Attaching Pad
Fig.
Ref.
Dimension
Location
k
13-11/32
Center of lower surface of rear
(Sedan &
bumper attaching bolt head (See
Coupe)
Fig. 3-13).
REAR COMPARTMENT
PAN SIDE RAIL
SPRING SUPPORT
REINFORCEMENT
BUMPER BRACE
DATUM LINE
1845
Fig. 3-13-Rear Bumper Attaching Bolt
Advertisement
