Advertisement
DOORS
6-77
Fig. 6-104—Front Door Hardware - " B - C " Hardtop and Convertible Styles
1. Window Lower Sash Channel
to Rear Guide Plate Bolts
2 . Inner Panel Cam
Attaching Bolts
3. Window Front Up-Stop
4. Window Rear Up-Stop
5. Rear Guide Upper
Attaching Bolt
6. Rear Guide to Lower
Support Bracket Bolt
7. Ventilator Lower Frame
Adjusting Stud and Nut
8. Ventilator Division Channel
Lower Adjusting Stud
and Nut
9. Window Regulator Attaching Bolts
2. With window in full-up position, remove front
up-stop ("3", Fig. 6-105).
3. Remove front guide upper attaching bolts "4",
adjusting stud nut "5", and nut from lower
attaching stud "6" (stud caged in front guide).
4. Turn adjusting stud 6 to 8 turns (clockwise)
to eliminate wedge strap to window interfer-
ence and disengage guide from window roller
by pulling guide down and rearward.
5. To install, reverse removal procedure.
FRONT DOOR WINDOW REAR GUIDE-
26657 Style
Removal and Installation
1. Remove door trim assembly and inner panel
water deflector.
2. Using a 1/4" hex head wrench, remove rear
up-travel stop from window rear sash channel
cam ("7", Fig. 6-105).
Advertisement
