Advertisement
DOORS
6-67
MERE CONTACT AT
EITHER POINT IS
N O T SUFFICIENT
INCORRECT
GLASS BEHIND
OUTER LIP .
7)
SLIGHT COMPRESSION
OF INNER LIP
CORRECT
2 U 9
FRONT DOOR WINDOW ASSEMBLY-
26657 Styles
The front door window assembly consists of a solid
tempered safety plate glass window and an individ-
ually bolted-on roller at the front and window roller
cam at the rear. The lower sash channel cam is
bolted to the glass, but is removed in the process of
removing the window.
Figure 6-91 is an exploded view of the window as-
sembly and identifies the various components and
their assembly sequence.
Fig. 6 - 9 0 - W i n d o w to Side Roof Rail
Weatherstrip Alignment
Removal and Installation
1. Remove door trim pad and inner panel water
1. Window Glass
2. Bushing
3. Nut
4 . Roller Assembly
Fig. 6-91 —Front Door Window Assembly - 26657 Styles
5. Glass Bearing Fastener
6. Glass Bearing Fastener
Cap
7. Washer
8. Washer (metal)
9. Stud, Inner Panel
Cam
10. Rear Guide Cam Assembly
11. Bolt, Guide Cam Assembly
12. Stud, Rear Guide Cam
(Stud Portion for Up-
Stop Attachment)
Advertisement
