Advertisement
15-8
SEATS
Fig. 15-5-Front Seat Assembly - Four-Way Tilt - Buick "B, C & E" Styles
A. Adjuster-to-Seat Attaching
Bolts
B . Horizontal Cables - Black
C. Vertical Gearnut
D. Horizontal
E . Track Cover Supports
F . Motor and Transmission
Support Attaching Screws
G. Motor Attaching Screws
H . Transmission Attaching
Screws
I . Rear Vertical Cables - Blue
2. Disconnect wire harness from motor relay
assembly.
3. Remove screws securing motor and transmis-
sion support to seat bottom frame. (Fig. 15-6).
4. R e m o v e
motor-to-motor support attaching
screws and remove
motor assembly from
support.
5. To install; reverse removal procedure making
sure rubber coupler is properly engaged at
both motor and transmission ends. Check op-
eration of seat to full limits of travel.
VERTICAL GEARNUT-"A" Body
Removal and Installation
1. Operate seat assembly to fully raised and
midway position.
2. Remove front seat assembly from body as
Advertisement
