Advertisement
SEATS
15-53
3. To install, reverse removal procedure. To
install seat back lock refer to "Folding Second
Seat Back Lock - Installation".
FOLDING THIRD SEAT AND FLOOR PANEL
ASSEMBLY-"65" Styles
Removal and Installation
1. Raise folding third seat. Remove rear com-
partment left side panel. (See Fig. 15-68).
2. Remove seat back linkage-to-compartment side
pan attaching bolt (Fig. 15-76) at both right and
left sides of seat.
3. At left side of seat remove seat back hinge
pin retainer (Fig. 15-76).
4. Carefully move seat back assembly to the left
sufficiently to disengage right seat back hinge
pin from hinge pin retainer; then, remove fold-
ing third seat assembly from body and place on
a clean surface.
5. To install folding third seat and floor panel
assembly, reverse removal procedure. Make
sure a seat back hinge pin bushing is installed
over both hinge pins. Also install flat washer
between seat back linkage and compartment
side pan and spring washer between linkage
and bolt head (Fig. 15-76).
FOLDING THIRD SEAT CUSHION TRIM
ASSEMBLY-"65" Styles
1. Raise folding third seat. Raise front of third
seat cushion and prop in up position.
BACK HINGE P I N -
RETAINER AND —
BUSHING BOLTS-
ACK LINKAGE BOLT
SPRING
WASHER
SEAT CUSHION FRAME
SPRING WASHER
BUSHING
HINGE PIN
RETAINER
HINGE PIN
BUSHING
SEAT BACK HINGE PIN
SEAT BACK LINKAGE
WASHER
CUSHION FRAME TO
SEAT BACK PANEL BOLT
SEAT BACK PANEL
1219
Fig. 15-76-Folding Third Seat
Advertisement
