Oil Supply And Cleaning Web Unit Removal - Gestetner B070 Service Manual

3.11 FUSING UNIT

3.11.1 OIL SUPPLY AND CLEANING WEB UNIT REMOVAL

[A]
[B]
1. Turn off the machine and wait for the oil supply and web cleaning unit to cool.

CAUTION
To avoid minor burns, allow sufficient time for fusing unit to cool.
2. Open the front doors and pull out the fusing and exit unit [A].
3. Fusing unit inner cover [B] ( x 2).
4. Oil supply and cleaning web unit [C] ( x 1).
NOTE: After re-installing the oil supply and cleaning web unit, confirm that the
web take-up roller gear is engaged with the gears of the fusing unit.
SP1902 001 (Web Motor Control – Web Consumption) should be set to "0" every
time the oil supply/cleaning web is replaced. This setting will not take effect until
the machine is cycled off/on.
SM
CÓPIA NÃO CONTROLADA
3-99
CÓPIA NÃO CONTROLADA
FUSING UNIT
[C]
B070R501.WMF
B070/B071