Buffer Installation Procedures; Unpacking The Buffer - AGFA Avantra 36/44 Service Manual

Avantra 36/44 Service Manual
1.2

Buffer Installation Procedures

1.2.1 Unpacking the Buffer

The buffer ships in a single cardboard box attached to a wooden pallet (see
Figure 1-1).
Tools: Strap cutters, 7/16¨ hex wrench, 9/16¨ hex wrench
Steps:
1. Cut the two (2) straps around the cardboard sleeve and remove the top
cardboard cover. Refer to Figure 1-1.
1
2
3
1-2 Installation
Figure 1-1 The buffer shipping box.
–Box cover. –Shipping straps (2).
–Shipping box.