Avantra 36/44 Service Manual
1.2
Unpacking the Crane
The crane ships in a single cardboard box attached to a wooden pallet.
Tools: Strap cutters
Steps:
1. Move the packing box to the imagesetter site and place it on the right hand
side of the OLP.
2. Cut the ties around the box. Lift off the top and remove the packing.
3. Lay out and check the contents against the items shown in Figure 1-1.
4
3
–Boom (arm/mast assembly). –Cassette cable.
1-2 Mounting
Figure 1-1 Crane inventory.
–Capture bar. –Head (rack/cassette crane).
1
2