AGFA Avantra 36/44 Service Manual page 42

Avantra 36/44 Service Manual
1
2
Figure 1-14 Preparing the media transport retainer bracket.
–Media transport retainer bracket (one of two).
–Shipping screw (one of two),between two lockdown screws.
9. Locate the take-up light shield in the center of the unit. Refer to Figure 1-15.
Remove the shield by unscrewing the three (3) locking knobs and pulling the
shield straight out.
1
2
Figure 1-15 Removing the take-up light shield.
–Take-up light shield. –Three shield locking knobs.
1-18 Installation