Avantra 36/44 Service Manual
8. Using a phillips screwdriver, remove the four (4) screws on the top and the
two (2) screws on each side of the box. Refer to Figure 3-4.
9. Open the top of the box and disconnect the:
a.
Low voltage CPU power connector
b. Power board cable
Refer to Figure 3-4.
Figure 3-4 Electronics box side/top screws and power cables.
–Side screws. –Four top screws. –Low voltage and CPU power cables.
3-6 Removal and Replacement
1
3
1
2