AGFA Avantra 36/44 Service Manual page 149

Avantra 36/44 Service Manual
Avantra Modem Specifications
Data Rate:
Data Compression:
Data Correction:
Compatibility:
Command Support
Operation:
Dialing:
Intelligence:
Command Buffer
Memory:
Weight:
Dimensions*:
Interface:
Telephone Interface:
Receive Sensitivity:
Transmit Level:
Input Power
Environment**:
*
The dimensions are critical only if installation of the modem inside the Avantra is desired. The
modem mounting bracket inside the system is sized to fit the above mentioned dimensions exactly.
**The electronics inside the Avantra (DEC PCB) provide a power source for a built-in modem. If a dif-
ferent power source is needed for a particular modem, an external AC to DC adapter will be required.
3-62 Diagnostics
2400 BPS or faster
CCITT V.42BIS, MNP Class 5
CCITT V.42, MNP Class 2-4
CCITT V.42BIS/V.42/V.22BIS/V.22/V.21/
V.29/V.27 Bell 212A, 103
Hayes extended AT Command set
Full or half-duplex
Pulse or Tone
Auto-dial, auto answer, auto speed selection
40 Characters
Non-Volatile RAM, stores four (4) telephone numbers and 2
configurations of modem settings
7.4 ozs. (210 grams)
4.9" x 2.7" x 1" (12.4cm x 7cm x 2.5cm)
RS-232C
RJ11
- 43 dbm
- 12 dbm
9VDC, 300 ma
32 to 133 (operating)
-40 to 140 (non-operating)