Avantra 36/44 Service Manual
Chapter 3: Imagesetter Diagnostics
Describes the tools used to diagnose and troubleshoot the Avantra.
Chapter 4: Imagesetter Component Removal/Replacement Proce-
dures
Provides the procedures for removing and replacing components within
the Avantra imagesetter.
Chapter 5: Imagesetter Alignment Procedures
Provides the procedures for aligning and adjusting the Avantra 36/44
imagesetter.
Chapter 6: Imagesetter Preventive Maintenance
Describes the procedures for inspecting and cleaning the Avantra 36/44
imagesetter.
Appendix A: Specifications
Lists the Avantra 36/44 specifications for the imagesetter including physical,
electrical, environmental, and functional data.
Appendix B: Spare Parts
Index
Section II: Bridge
Chapter 1: Bridge Installation Procedures
Provides the information necessary for installing the internal bridge.
Chapter 2: Bridge Functional Analysis
Provides an operational and functional overview of the Avantra's internal
bridge.
Chapter 3: Bridge Debugger Diagnostic Tool
Describes the set-up and use of this tool for diagnosing problems
associated with the bridge and buffer.
Chapter 4: Bridge Component Removal/Replacement
Provides
components within the Avantra bridge.
Appendix A: Spare Parts
Index
Section III: Buffer
Chapter 1: Buffer Installation Procedures
Provides the information necessary for unpacking, unlocking and
installing the Avantra buffer.
xviii Introduction
the
procedures
for
removing
and
replacing
defective