AGFA Avantra 36/44 Service Manual page 501

Avantra 36/44 Service Manual
5. While holding the head in this position, work the power cable at the bot-
tom of the boom arm past the first set of guide roller mounting blocks on
the head. Refer to Figure 1-9.
1
2
3
–Roller. –Rear mounting bracket. –Power cable/connector. –Head.
6. Loop the cable around the guide roller mounting block on the left side as
viewed from above. Refer to Figure 1-9.
1-10 Mounting
Figure 1-9 Routing the power cable.
–Crane boom.
4
5