Unlocking The Buffer - AGFA Avantra 36/44 Service Manual

Avantra 36/44 Service Manual
9. Each person must grip the unit at the top of the side panel opening. Refer
to Figure 1-4. Lift the unit free of the pallet, and set the unit on the floor.
WARNING:
it be tilted. The top cover on the unit is not attached and will come
off.
10. Replace the side panels at the bottom of the unit frame. Refer to Figure 1-4.
CAUTION:
could bend and break the lock pins.

1.2.2 Unlocking the Buffer

The buffer comes with a kit for preparing the unit. Check the kit's contents against
the hardware shown in Figure 1-5.
Figure 1-5 Hardware for preparing the buffer.
–Two hex bolts (for buffer/imagesetter interface). –Plastic plugs.
1-6 Installation
Do not try to lift the buffer unit from the top, nor should
Do not force the side panels back into place. Doing so
1
2