Avantra 36/44 Service Manual
9. Remove the tape from the door at the top of the engine (see Figure 1-6).
Remove the foam from the dryer section.
10. Place the drip tray, trolley and fluid containers under the OLP. Refer to
Figure 1-21.
Figure 1-21 Placing the drip tray, chemistry trolley and fluid containers.
–Drip tray. –Chemistry trolley. –Fluid containers.
11. Underneath the engine, cut the tie wraps for the:
•
red (developer) hose
•
blue (fixer) hose
•
grey (water supply) hose
•
black and white wires (replenishment sensors)
1-26 Installation
2
1
3