The Activator Switch - AGFA Avantra 36/44 Service Manual

Avantra 36/44 Service Manual
4.6

The Activator Switch

Tools: Phillips head screwdriver, flathead screwdriver
Remove:
1. Using a phillips head screwdriver, remove the three (3) cover screws. Refer
to Figure 4-4.
2. Disconnect the switch connectors. Refer to Figure 4-4.
3. Using a flathead screwdriver, remove the two switch mounting screws.
Refer to Figure 4-4.
2
–Cover. –Three cover screws. –Switch connectors.
–Two switch mounting screws. –Activator switch.
Replace:
1. Reverse the procedures above.
4-6 Removal and Replacement
Figure 4-4 Activator switch.
1
3
4
5