AGFA Avantra 36/44 Service Manual page 185

Avantra 36/44 Service Manual
1
2
6
8
Figure 4-17 Digital Engine Controller PCB (DEC) (cable locations).
–SDMs (2). –CSDM cable (behind SDM cable). –Power supply. –OCP.
–Vacuum.
6. Remove the six (6) hex screws from the bottom of the electronics enclo-
sure securing the DEC plate to the enclosure. Refer to Figure 4-18.
7. Remove the three (3) hex screws securing the DEC PCB in the enclosure
and remove the board. Refer to Figure 4-18.
4-26 Removal and Replacement
3
–Apis. –Bridge. –Modem. –Modem power
4
5
7
9