AGFA Avantra 36/44 Service Manual page 19

Chapter 2: Buffer Functional Analysis
Provides an operational and functional overview of the Avantra's buffer.
Chapter 3: Buffer Component Removal/Replacement
Provides the
components within the Avantra buffer.
Chapter 4: Buffer Preventive Maintenance
Describes the procedures for inspecting and cleaning the Avantra buffer.
Appendix A: Spare Parts
Index
Section IV: On-line Processor (OLP)
Chapter 1: OLP Installation Procedures
Provides the information necessary for unpacking, unlocking and
installing the Avantra OLP. Included are the electrical, plumbing, and
other physical requirements that must be met.
Chapter 2: OLP Functional Analysis
Provides an operational and functional overview of the Avantra's OLP,
including descriptions of the electronics, boards, and sensors.
Chapter 3: OLP Component Removal/Replacement
Provides the
components within the Avantra OLP.
Chapter 4: OLP Preventive Maintenance
Describes the procedures for inspecting and cleaning the Avantra buffer.
Appendix A: Specifications
Lists the Avantra 36/44 specifications for the OLP and buffer including
physical, electrical, environmental, and functional data.
Appendix B: Spare Parts
Appendix C: Wiring Diagrams
Index
Section V: Crane
Chapter 1: Crane Mounting Instructions
Explains how to unpack and install the Avantra 36/44 crane, which
attaches to the OLP.
Chapter 2: Crane Component Removal/Replacement Procedures
Provides the procedures for removing and replacing components within
the OLP crane.
Appendix A: Spare Parts
Index
procedures for removing
procedures for removing
Introduction
and replacing defective
and replacing defective
Introduction xix