Config Comm. Port
This menu selection selects which communication port on the PC to use when
communicating to the imagesetter. The choices are:
COM1-NONE,
COM1-XON/XOFF
COM2-NONE
COM2-XON/XOFF
or the internal CGEN Serial Port ATMSCC
Other communication ports are not supported (i.e., com3 or com4).
Modem Functions
This menu selection brings up a dialog box with a list of modem functions per-
formed by the AVDIAG:
Dial-out
Hang Up
Modem Command Strings
This item initiates a dial-out sequence.
This item causes the modem to drop the carrier
and disconnect. It uses the hang-up string
defined in the modem command strings.
This item modifies the default modem strings
such as the dial-out, modem initialization and
hang-up strings.
Modem command strings:
*Dialprompt
= FALSE
Modeminit
= AT
Dialout
= ATDT
Hangup
= ATH
*Set to TRUE to get the PC to simulate a remote
center PC.
Section I: Imagesetter
Diagnostics 3-45